About UsQualityProductsContact UsNewsHome Español
<img src="../images/suplenteflash.gif" width="436" height="31">
Additives to improve films performance
White Masterbatches
Black Masterbatches
Reinforced Polypropylene
Using Masterbatch 725-3NT
 

Black Masterbatches

To apply a black pigment is not as easy as it may seem at first glance, although it is commonly said that anything can be painted in black. However, behind the black color there are different products offering more than just a color.

Depending on the carbon black particle size, black masterbatches may have different properties and are suitable for different applications. Carbon black particle sizes range from 50 nm to 19 nm. The following graphic shows the different properties depending on the particle size.


Particle Size Large Property Particle Size Small
LIGHT Color DARK
WEAK Color Strength STRONG
BLUE Undertone BROWN
LOW Viscosity HIGH

As it may be observed, the smaller the particle, the better color strength and the darker the end color.

Comai offers a full range of carbon black types with its black masterbatches. The following table shows the most important types and their usual application.


Product UV Resistance Opacity COMAI Product & Particle Size
Packaging bags - 3 682-1 NE (50 nm)
Garbage bags - 3 682-1 NE (50 nm)
Industrial bags, Milk packagings, Geomembrane 2 3 682-1 NE (50 nm)
682-8 NE (19 nm)
Rafia, Sacks 4 3 681-6 NE (25 nm)
681-8 NE (19 nm)
Rafia, Greenhouses 6 6 681-8 NE (19 nm)
682-8 NE (19 nm)
Agricultural Film 6 6 682-8 NE (19 nm)
Fibers 6 6 681-8 NE (19 nm)
682-9 NE (19 nm)

The above table includes the UV protection factor which has not been considered in the selection of the type of masterbatch – the smaller the particle size, the better the UV protection – an important property to consider for greenhouse, sack and geotextile films. The following graphic illustrates the available black masterbatches UV protection and their behaviour depending on the carbon black particle size.


FAILURE POINT TO LIGHT EXPOSURE TO CARBON BLACK PARTICLE SIZE RATIO

For further information and technical assistance, please contact Propilco and Comai Application Engineers who will support and assist you to make the best decision regarding a specific type of product.



 
POSDATA Zona Franca Industrial Mamonal Bdg. 7 y 8     
Phones: (+57 5) 668 5862 - 668 5449 - 668 5597     
668 5719 - 668 5928 - Fax: (+57 5) 668 5858     
E-mail: comai@comai.com.co     
     Cartagena de Indias - Colombia